APPARENT WIND INDICATORS        SLOT STRIP        NEEDLESPAR MASTS & BOOMS        NEWS        DISTRIBUTORS

Home

Apparent Wind Indicators

Little Hawk Mk2 Assembly Instructions

Ensure you have all the correct pieces:

1 x Vane Arm
1 x Support Rod
1 x Mast Clamp

Fit the Vane Arm onto the Support Rod as shown.

Ensure the base of the Vane Arm clips into the Support Rod moulding.

Check that the Vane Arm turns freely.

Loosen the screw on the top of the Mast Clamp as shown.

Push the Support rod all the way into the Mast Clamp socket.
 

Ensure the Vane Arm is centralised and square to the mast clamp.

Tighten the screw on top of the mast clamp to lock the Support Rod in position. Ensure the Support Rod can not fall out before use.
 

Place the Little Hawk Mk2 on the front of the mast either just below or just above the Goose Neck.

Tighten the elastic as required.

 Tel: +44 (0)23 92463864   Email: sales@hawkmarineproducts.com