APPARENT WIND INDICATORS        SLOT STRIP        NEEDLESPAR MASTS & BOOMS        NEWS        DISTRIBUTORS

Home

Apparent Wind Indicators

Little Hawk Race Assembly Instructions

Ensure you have all the correct pieces:

1 x Vane Arm
1 x Support Rod
1 x Mast Clamp
2 x Screws

Fit the Vane Arm onto the Support Rod as shown.

Ensure the base of the Vane Arm clips into the Support Rod moulding.

Check that the Vane Arm turns freely.

 

Align the Mast clip to the top of your mast.

It is ideally situated about 6cm from the top and clear of all the pullies.

You will need to drill 2 x 2.5mm holes and screw the mast clip in with the Screws provided.

The support rod will just clip in or out as required.

 Tel: +44 (0)23 92463864   Email: sales@hawkmarineproducts.com